Back to top

Showroom

Tractor Mounted Road Broomer
(5)
Tractor Mounted Road Broomer And Sweeper are vehicles that clean and removes dirt from roads, pavements, and other hard surfaces. Road sweepers can clean with brushes or with air. Traditional road sweepers spray water onto the road surface through jets located underneath the frame of vehicle.

Bitumen Sprayer
(4)
A Bitumen Sprayer is used of spraying bitumen on the surface of a project area, in a regulated and even manner prior to laying the hot mix asphalt. This devices are important for a builder since they can be used for maintenance or new construction.
Road Cleaner
(3)
Road cleaners are fabricated for the cleaning of site roads, runways, streets etc. Our offered products are highly admired for their excellent dust capturing abilities and fast operations. Road cleaners use water as a source of cleaning and sweeping roads.
Kerb Paver And Spares
(6)
Kerb Paver And Spares are usually placed on a concrete bed with a thickness of at least 100 mm and joined to the pavement. To have lateral protection, the back of the kerbing should be haunched with concrete to a thickness of around 150 mm.
Curb Cutting Machine
(3)
It is estimated that the Curb Cutting Machine saves 60 percent or more on job prices. The machine has the ability to accommodate the needs with residential and commercial driveway entrances, parking lot modifications and any other type of curb cutting needs.
Batch Hot Mix Plant And Spares
(3)
The Batch Hot Mix Plant And Spares allows one to prepare various types of mixes in a single plant without interrupting the work process. In addition, a batch plant is more complex, but it is more profitable.
Road Paver Finisher And Parts
(4)
Asphalt is laid on sidewalks, bridges, parking lots, and other similar areas using Road Paver Finisher And Parts. Modern paver machines have hydraulic loading legs that stretch for fast loading and transport, as well as the ability to adjust widths easily.
Hot Mix Plant Spare Parts
(2)
There are basically two types of hot mix plants, including batch type and drum type and both of them require Hot Mix Plant Spare Parts, when there is a need for repair or replacement of the respective components.
Road Groove Cutting Machine
(2)
One of the most common reasons for cutting lengthwise grooves into concrete using the Road Groove Cutting Machine, is to reduce noise. This machine does a better job is creating the required size of grooves and help reduce the noise level.
Road Groove Cutter
(4)
The purpose of the Road Groove Cutter is to soften the surface along the agreed line so that it fractures there rather than somewhere else. To be efficient, the contraction joint must be at least one-quarter the thickness of the surface.
13HP VST Shakti Groove Cutter
(3)
Shakti Groove Cutter is a product used for performing groove construction on concrete surfaces. This process has been shown to significantly increase the efficiency of drainage and skid resistance. Moreover, this equipment includes an adjustable line pointer for guiding its operator.
Trimix Machine
(3)
Trimix Machine is basically used for carrying out the tremix flooring which is a well-known form of flooring and commonly used in the industry applications. Trimix flooring has high wear and tear resistance, making it long-lasting and environmentally friendly.
Road Construction Control Panel And Spares
(2)
Road construction control panel and spares are basically the central distribution point for directing power to various appliances. These provide safety to the connected appliances from different types of hazards and damages. Road construction control panel and spares are durable and versatile.
Concrete Floater
(3)
Since the operation of Concrete Floater effectively recompacts the concrete floor, possible plastic-shrinkage and cracking generated by the concrete drying so rapidly is closed up again. The smooth finish also makes the concrete floor less prone to cracking in the future.
Reversible Concrete Mixture
(1)
In the field of construction, the RMC Concrete Plant And Spares are in high demand. There are different varieties of ready mix concrete plants, the majority of which are built for particular locations or situations.
Diesel Burner And Spares
(2)
Diesel burner and spares are designed for combusting flame and igniting heating oil or biodiesel fuel. These are highly efficient, easy to install, robust in construction and highly durable. Diesel burner and spares can control the heating temperature within a combustion chamber.
Bull Float and Texturing Brush
(2)
Bull float and texturing brushes improve the texture of the concrete surface. These are efficient in filling the voids in the surface and levelling the ridges. Bull float and texturing brushes make the surface smooth by removing any kind of imperfection.
Filter Bag and Cages
(2)
There is a lot of dust and gas pollution externally during the cement manufacturing process and there are several different filter bags that can be selected to satisfy varying working conditions, however, the best one is the Filter Bag Cage.